General Information

The EEG NeuroAmp consists of four function blocks:

• Two-channel EEG amplifier
• A three-channel peripheral bio signal amplifier
• Signal generator for tactile feedback
• Impedance meter

All functions are controlled by the PC software except the impedance meter, which is also available as a stand-alone device.

The impedance meter helps achieve balanced EEG electrode contacts. It displays the impedances of up to five electrodes independently and in real time.

Features:

• Built-in impedance meter helps to achieve optimum electrode contacts.
• Two-channel EEG amplifiers are aligned and high-resolution.
• Three additional channels allow measurement of peripheral biofeedback signals such as GSR, temperature or HEG.
• A signal output directly controls tactile feedback devices such as Neury, the tactile bear, and light stimulation glasses.
• USB powered - means no changing batteries
• Software controlled power switch and auto shut-off with inactivity.
• Warning signals if electrodes are worn out.
• Warning light on low battery.
  

Specifications

Easy to use
High-Performance design to ensure valid EEG readings
Conforms to all applicable norms with regard to professional medical equipment
Impedance Meter

Wide impedance range (<5k...100k)
Cancellation of electrode gavanic voltages
Cancellation of power line pick-up (notch filters)
Bright easy-to-read LED bar display
Balance display for optimum EEG signal noise reduction
Bad electrode Warning
EEG Amplifier

Two channels
100% remote-controlled by therapist's software
Low noise amplifiers, quasi-DC coupled
Fast settling time
High performance filters for optimum anti-aliasing
Peripheral Sensor Interface

Three inputs
Supply of power for active sensors
High-performance filters for optimum noise suppression
Audio/Visual/Tactile Output

Programmable analog output
DC -2.5 to +2.5V
AC 1...250Hz, Max 5Vss
Power Supply

System Requirements

• Windows XP or Windows Vista (Mac Platform not supported)
• Microsoft's DirectX version 9.0c or later
• 1.6 Ghz Core Duo or 2.4 Ghz Pentium 4.
• 1 Gig RAM for Windows XP, 2 Gigs of RAM for Windows Vista
• Sound card
• A graphics card with 256 MB of dedicated video RAM
  Integrated video systems that share memory with the processor are not capable of supporting the advanced graphics and are not supported.
• Graphics card capable of supporting dual monitor displays
• DVD-Rom drive
  

Limited Warranty

The EEG NeuroAmp is guaranteed to be free from defects in material and workmanship for one year from the date of purchase. In the unlikely event that repair is necessary, call EEG Info to receive a Return Authorization. Then send the unit back by a traceable method--Neither BEE Systems nor EEG Info will be responsible for items not received. We will repair or replace your unit(s) free of charge. This warranty does not apply to damage incurred through accident, alteration, or abuse, nor to damage created by static electricity. Do not use this equipment in a dry, static-prone area unless using an anti-static mat or anti-static spray on carpeted areas. We may refuse to honor this warranty if the unit has been opened or un-authorized repair attempts are detected. We accept no liability for accidental damage or for consequential damages, including, for example lost profit, downtime, damage or replacement of devices or property from a breach of the warranty.

IMPORTANT: Remove dead batteries promptly to prevent corrosion damage.

Return to the NeuroAmp page