How to Install USB NeuroAMP

1. Insert CD into CD-ROM Drive – Do not plug in NeuroAmp until CD is in the drive

2. Plug in NeuroAmp into any available USB port

3. Wait for the "Found New Hardware Wizard" to appear

4. If the Wizard asks you to connect to Windows update select "No, Not This Time" and click "Next".

5. Choose "Install the Software Automatically" and then click "Next".
(If the software reports that no drivers can be found, click here for help.)

6. You will get a "has not passed Windows Certification Logo Testing" warning box. Simply click "Continue Anyway".

7. Click "Finish" to continue on to the next part of the installation.

8. The "Add New Hardware Wizard" will come up a second time. The next steps are the same as steps 4 - 7 above.

9. Review the following articles below to find what COM Port your USB NeuroAmp is assigned to and to add the NeuroAmp as a Device in BioExplorer.

Please review the following articles from the EEG INFO Knowledgebase / Frequently Asked Questions at www.eegsupport.com

To find out what Com Port your NeuroAmp is assigned to:
Determining COM Port Settings
http://eegsupport.com/knowledgebase/entry/13/9/

Adding the NeuroAmp as a Device in BioExplorer
http://eegsupport.com/knowledgebase/entry/1/42/

Using EEG INFO Designs for BioExplorer
http://eegsupport.com/knowledgebase/entry/1/101/

How to Record and Playback a session in BioExplorer
http://eegsupport.com/knowledgebase/entry/1/107/

Back to NeuroAmp.com

EEGINFO.com