EEG INFONeuroAmp

 

 

 

 

 

 

How to Install USB NeuroAMP

These instructions apply only to installing files from this web site.
Click here for instructions if you are installing from the NeuroAmp CD

FIRST Download and extract the drivers below – DO NOT plug in NeuroAmp until the drivers are downloaded and extracted.

1. Click here to download the USB NeuroAmp Drivers.

File Download

2. Choose "open" or "run" when prompted.

Download Progress Windows

3. Files will be automatically extracted to C:\Program Files\EEG\NeuroAmp_Drivers

4. Plug in NeuroAmp into any available USB port

USB Plug


5. Wait for the "Found New Hardware Wizard" to appear


Add New Hardware Wizard

6. If the Wizard asks you to connect to Windows update select "No Not This Time" and click "Next".

Add New Hardware Wizard

7. Choose "Install from a list or specific location" and then click "Next".

Add New Hardware Wizard

8. Check the box marked "Include this location in the search" and then press "Browse"

Add New Hardware Wizard

9. Browse "My Computer" to "Local Disk C" to "Program Files" to "EEG". Select "Neuroamp_Drivers" and press "OK"

Browse For Folder

10. Press "Next" to install from the specified location.

Found New Hardware Wizard

11. You will get a "has not passed Windows Certification Logo Testing" warning box. Simply click "Continue Anyway".

Has Not Passed Windows Certification

12. Click "Finish" to continue on to the next part of the installation.

Found New Hardware



13. The "Add New Hardware Wizard" will come up a second time. This is normal and expected as the NeuroAmp requires 2 sets of drivers. Repeat steps 5 - 12 above to complete drivers installation.

Found New Hardware Wizard

 

14. Review the following articles below to find what COM Port your USB NeuroAmp is assigned to and to add the NeuroAmp as a Device in BioExplorer.

Please review the following articles from the EEG INFO Knowledgebase / Frequently Asked Questions at www.eegsupport.com

To find out what Com Port your NeuroAmp is assigned to:
Determining COM Port Settings
http://eegsupport.com/knowledgebase/entry/13/9/
Adding the NeuroAmp as a Device in BioExplorer
http://eegsupport.com/knowledgebase/entry/1/42/

Using EEG INFO Designs for BioExplorer
http://eegsupport.com/knowledgebase/entry/1/101/
How to Record and Playback a session in BioExplorer
http://eegsupport.com/knowledgebase/entry/1/107/

Back to NeuroAmp.com

EEGINFO.com

 


1
EEG INFO © 2006 - 22020 Clarendon St, Woodland Hills, CA 91367 (818)373-1334