|
Showing: 1-15 of 15
Questions
|
| |
 |
Installing USB NeuroAmp Drivers - Windows Vista
Install Cygnet software from the Cygnet CD-Rom
The following instructions assume that
|
|
| Not rated |
29 Aug, 2008 |
Views: 61 |
|
|
|
Can I extend the neuroamp wire using a USB extension cable or USB hub?
Answer: Unfortunately this configuration is not support and not tested, and therefore strongly discouraged. Please connect the neuroamp directly to...
|
|
| Not rated |
28 Jul, 2008 |
Views: 78 |
|
|
|
Where can I download the latest BioExplorer designs for EEG Info NeuroAmp?
You can download the EEG INFO BioExplorer Designs Free at www.NeuroAmp.com.
Click below to download the latest designs directly:
EEG INFO...
|
|
| Not rated |
12 Jul, 2007 |
Views: 1407 |
|
|
|
Adding the EEG INFO NeuroAmp as a Device in BioExplorer
Open BioExplorer (Be sure to have HASP Dongle inserted in a USB port)
Click on BioExplorer (at the top left of the BioExplorer window)
...
|
|
 |
30 Jan, 2007 |
Views: 1015 |
|
|
|
How do I turn on the EEG INFO NeuroAmp ?
The EEG NeuroAmp is completely remote-controlled from your biofeedback PC software. No user interaction at the device is needed other than impedance...
|
|
| Not rated |
26 Jan, 2007 |
Views: 544 |
|
|
|
How to check impedance during a session with the EEG INFO NeuroAmp
You may re-check the quality of the electrode connections at any time by turning the Impedance Meter mode of the EEG NeuroAmp on. Note that during...
|
|
| Not rated |
26 Jan, 2007 |
Views: 570 |
|
|
|
What does sampling rate and anti-aliasing mean?
The EEG NeuroAmp amplifies the signals from your EEG electrodes and peripheral sensors. These signals are then converted to numbers that can be...
|
|
| Not rated |
25 Sep, 2006 |
Views: 727 |
|
|
|
Why is the NeuroAmp battery operated as opposed to having an external power adapter?
For safety reasons. If there is no connection to the line, e.g. by means of a power supply, there is no part that could break and do any harm. Great...
|
|
| Not rated |
20 Jun, 2006 |
Views: 494 |
|
|
|
Why do I need the impedance meter feature at all?
Successful neurofeedback builds on a good EEG signal. Using a distorted EEG signal is like trying to listen to a piece of music in the middle of a...
|
|
| Not rated |
10 May, 2006 |
Views: 596 |
|
|
|
Does the Impedance Meter in the EEG NeuroAmp distort my EEG measurement?
No, because the impedance meter is completely galvanically disconnected from the electrodes and the EEG amplifier when it is turned off. So , turn...
|
|
| Not rated |
10 May, 2006 |
Views: 512 |
|
|
|
How does the impedance meter of the EEG INFO NeuroAmp work?
The EEG NeuroAmp uses a weak AC signal to determine the electrode - scalp impedances. The voltages used are smaller than .1V rms and the currents are...
|
|
| Not rated |
26 Jan, 2007 |
Views: 552 |
|
|
|
Using EEG INFO Designs for BioExplorer
The EEG Info Designs for BioExplorer have been specially designed by Sue Othmer, BCIAC and the EEG Institute for use with the EEG NeuroAmp. Download...
|
|
| Not rated |
30 Sep, 2006 |
Views: 678 |
|
|
|
How to Record and Playback a session in BioExplorer
To Record a session in BioExplorer
Open BioExplorer and open a design
Click on Session set BioExplorer to Capture
Press the Play...
|
|
| Not rated |
30 Sep, 2006 |
Views: 574 |
|
|
|
Can I use the Hershel Toomim NIR HEG device with the EEG INFO NeuroAmp ?
Yes. There is an adapter cable that is available that will allow for the Hershel Toomim HEG device to be used with the EEG Info NeuroAmp.
|
|
| Not rated |
30 Sep, 2006 |
Views: 657 |
|
|
|
Installing EEG Info USB NeuroAmp Drivers
How to Install USB NeuroAMP
click here for a video tutorial on connecting the neuroamp to your PC (8 min)
1. FIRST install Cygnet, or...
|
|
| Not rated |
13 Jan, 2008 |
Views: 715 |
|
|
