To proceed with these instructions make sure that you have already completed the steps in Running a CPT Test. The following instructions will...

These instructions assume you have installed the QIK software on your computer and are using a USB QIK Test. If you are using a Serial QIK...

This problem is related to QIK 3.4 software or later for use with USB QIK test. The QIK software attempts to automatically recognize your USB QIK...

Install QIK software from the QIK CD-Rom or download and install from www.eeginfo.com/qiktest. The following instructions assume that you have...

Install QIK software from the QIK CD-Rom or download and install from www.eeginfo.com/qiktest.

Set up QIK test box before test: Attach QIK test box to computer and open QIK Control Software. Press either button on unit...

Establish a connection to the Internet and go to http://www.eegexpert.com. If you are not already a member, click on the join button located under...

Only the CPT Visual test is normed. It is a full 21 minute test plus a 2-minute practice test. If you administer the full CPT test, you can upload...

The Qik test will work with chargers that output 9-12V DC at 100mA. 9V DC is recommended. A replacement charger should never exceed 12V DC. Any...